#############################################################################
#   Nozzle Cleaner Config
#############################################################################

[gcode_macro CLEAN_NOZZLE]
description: Nozzle cleaning using a silicone brush
gcode:
    G28
    # Raise the nozzle to avoid contact with the model
    G90
    G1 Z10 F3000            ; Raise the nozzle by 10 mm
    # Move to the starting position of the brush
    G1 X-3 Y35 Z4           
    G1 Y30
    # Start cleaning the nozzle
    G91
    {% for repeat in range(5) %}
      G1 Y-2 X2 F4000       ; Wipe diagonally down-right
      G1 Y-2 X-2 F4000      ; Wipe diagonally down-left
    {% endfor %}

    {% for repeat in range (5) %}
      G1 Y2 X2 F4000        ; Wipe diagonally up-right
      G1 Y2 X-2 F4000       ; Wipe diagonally up-left
    {% endfor %}

    {% for repeat in range(5) %}
      G1 Y-2 X2 F4000       ; Wipe diagonally down-right
      G1 Y-2 X-2 F4000      ; Wipe diagonally down-left
    {% endfor %}

    {% for repeat in range (5) %}
      G1 Y2 X2 F4000        ; Wipe diagonally up-right
      G1 Y2 X-2 F4000       ; Wipe diagonally up-left
    {% endfor %}

    {% for repeat in range(5) %}
      G1 Y-2 X2 F4000       ; Wipe diagonally down-right
      G1 Y-2 X-2 F4000      ; Wipe diagonally down-left
    {% endfor %}

    {% for repeat in range (5) %}
      G1 Y2 X2 F4000        ; Wipe diagonally up-right
      G1 Y2 X-2 F4000       ; Wipe diagonally up-left
    {% endfor %}

  G90
  G1 Z10 F3000              ; Raise the nozzle after cleaning